GANN-i niiskusmõõtjad > CLASSIC SEERIA > Hydromette UNI 2

Hydromette UNI 2

Tootekood € kmat € kmga Tartu laos Osta
30001550 341.25 409.50 0

The UNI 2 is an electronic and multipurpose meter for three measured values to which active electrodes for measuring structural moisture, air humidity, and temperature may be connected.
Additionally, all structural moisture measuring electrodes may be connected to the UNI 2 unit that are based on the resistance principle of measurement.

The following (active) electrodes may be connected:

  • B 50, B 60, LB 70 for non-destructive measurement and display of moisture in ceilings, walls, floors, or other building materials
  • MB 35 for concrete surface moisture measurement only
  • MH 34 for measuring high moisture values (40 to 200%) in coniferous wood only
  • IR 40 EL for sensing surface temperature, thermal bridges, and dew point temperature
  • RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex for air humidity and air temperature measurement and
  • all of our Pt100 temperature sensors

MEASURING RANGE

WOOD MOISTURE:
  • 40 – 200% (dry mass) using MH 34 on coniferous wood]
STRUCTURAL MOISTURE:
  • 0 to 199 digits (scanning range)
  • 0.3 to 8.5 wt.-% or
  • 0.3 to 6.5.0 CM-% using B 50, B 60, LB 70
  • 2 to 8 wt.-% using MB 35 on concrete surfaces
AIR HUMIDITY:
  • 0 to 100% R.H. using RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex
TEMPERATURE:
  • -50 to +600 °C depending on the Pt100 temperature sensor
  • Infrared measuring range: -20 to +199.9 °C using IR 40 EL


PROPERTIES

  • Quick measurement of moisture in set building materials using the resistance-based and capacitive radio frequency measuring techniques
  • The temperature measurement precision is achieved by Pt100 measuring resistors connected in 4-wire technology
  • Housing: 140 [L] x 90 [W] x 42/50 mm [H]